Intel Edison with Arduino Breakout Kit

Intel Edison with Arduino Breakout Kit

Intel Edison with Arduino Breakout Kit

9,199
Add to Cart

This kit includes an Arduino Breakout, which essentially gives your Edison the ability to interface with Arduino shields or any board with the Arduino footprint.

The Intel Edison module is included.

Specification: 

Physica                                                                                                                                               
Form factorBoard with 70-pin connector
Dimensions127.0 x 72.0 x 12.0 mm
Operating temperature0 to 40 degC
ConnectorHirose DF40 Series
(1.5mm, 2.0mm, or  3.0mm stack height)

Memory                                                                                                                                               

Max Memory size4GB
Memory typeDDR3, Nand Flash
Physical add. Ext.32-bit
# of  DIMMs0
ECC Memory supported: NO
External Interfaces                                                                                                                              
Total of 40 GPIOs which can be configured as:
SD Card1 Interface
UART2 Controllers
I2C2 Controllers
SPI1 Controller with 2 chip selects
I2S1 Controller
GPIOAdditional 12 (with 4 capable of PWM)
USB 2.01 OTG Controller
Clock Output32 KHz, 19.2 MHz
Major Edison Components                                                                                                                  
SoC22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz
RAM1 GB LPDDR3 POP memory
Flash Storage4 GB eMMC
WiFiBroadcom 43340 802.11 a/b/g/n
Dual-band (2.4 and 5 GHz)
On board antenna or external antenna SKU configurations
BluetoothBT 4.0
Power                                                                                                                                                  
Input3.3V – 4.5V
Output100ma @3.3V and 100ma @ 1.8V
PowerStandby (No radios): 13mW
Standby (BT 4.0): 21.5mW
Standby (WiFi): 35 mW
Firmware + Software                                                                                                                           
CPU OSYocto Linux v1.6
Development EnvironmentsArduino IDE
Eclipse supporting: C, C++ & Python
Intel XDK supporting: Node.JS & HTML5
MCU OSRTOS
Development EnvironmentsMCU SDK and IDE
 

 

comments powered by Disqus
Share this: Facebook Twitter
Copyrights © 2017 & All Rights Reserved by Tanna Educational Services.