INTRODUCING RASPBERRY PI MODEL B PLUS

FOR PRE ORDER MAIL US AT : [email protected]

 

The Model B+ uses the same BCM2835 application processor as the Model B. It runs the same software, and still has 512MB RAM; but James and the team have made the following key improvements:

  • More GPIO. : The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model B.
  • More USB. : We now have 4 USB 2.0 ports, compared to 2 on the Model B, and better hotplug and overcurrent behaviour.
  • Micro SD. : The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
  • Lower power consumption.:  By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
  • Better audio. :The audio circuit incorporates a dedicated low-noise power supply.
  • Neater form factor.: We’ve aligned the USB connectors with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes.
comments powered by Disqus